Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 449 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. U1000 - 11: Accessory Power mode Input - Circuit Short to Ground Overview: ISO Code (DTC Code) U1000 - 11 Customer Symptom Accessory power mode and Head lamps and power windows will not operate when in this power mode Fault Effects (On Vehicle) Accessory power mode and Head lamps and power windows will not operate when in this power mode Lamp Status (If Any) NA Fault Detection Condition This fault will be logged after the input switch test routine execution. User has to operate the switch manually during routine. If short to ground fault is detected for ignition power mode input switch then this DTC code will be returned with the Routine results. Normal Operating Condition There should not be any fault returned by routine. Probable Trouble Area 1. BCM connector wired wrong 2. Cockpit wiring harness short to ground 3. switch damaged 4. Ignition switch failure Healing Condition 1. Ignition OFF ON 2. Clear DTC Command Component Details: Accessory power mode input switch is part of Ignition switch and interfaced to the BCM. If the Accessory power mode input switch is activated and head lamps and power windows functionality will work properly. If user put the ignition switch to Accessory power mode input position, head lamps and power windows functionality will work. Accessory power mode input switch is active high. Preliminary Checks: 1. Check Battery Voltage (9V-16V) 2. Check ECU pins for oxidation, bending & damage. Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz