Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 399 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B1601 - 11: Bonnet State Switch - Circuit Short to Ground Overview: ISO Code (DTC Code) B1601 - 11 Customer Symptom 1. The IC shows Bonnet State as open status, even if the Bonnet is closed as presumed by the customer. 2. Interior Roof lamp in Auto mode selection will ON for 10 minutes. 3. The Mis-lock sound occurs on RKE lock command. Fault Effects (On Vehicle) 1. Unnecessary battery power consumption (because Interior Roof lamp in Auto mode selection will always ON for 10 minutes.) 2. The vehicle will not enter into arm state, when RKE lock is given and no alarm functionality will work. Lamp Status (If Any) 1. Interior Roof lamp in Auto mode selection will ON for 10 minutes. 2. Bonnet status on IC shows always ON. Fault Detection Condition This fault will be logged after the input switch test routine execution. User has to operate the switch manually during routine. If short to ground fault is detected for Bonnet State Switch, then this DTC code will be returned with the Routine results. Normal Operating Condition There should not be any fault returned by routine Probable Trouble Area 1. BCM connector Fault 2. Front side wiring harness short to ground 3. Bonnet State Switch is damaged or stuck or faulty 4. BCM ECU fault Healing Condition 1. Ignition OFF ON 2. Clear DTC Command Component Details: Bonnet State Switch, BCM connector Functionality: If the Bonnet State Switch is Short to Ground, then the Bonnet state is in opened/ ajar state. If the Bonnet State is opened, then BCM shall receive the feedback of Bonnet State as open/ ajar status. Preliminary Checks: 1. Check Battery Voltage (9V-16V) 2. Check ECU pins for oxidation, bending & damage. Trouble Shooting:
RkJQdWJsaXNoZXIy MTIwNTUz