Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 204 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B224A – 15: Right stop Lamp Circuit – Short to Battery or Open Circuit Overview: ISO Code B224A – 15 Customer Symptom Right Stop Lamps always ON. Fault Effects (On Vehicle) 1. Right Stop Lamp always ON. 2. Battery Drain Lamp Status (If Any) Always ON Fault Detection Condition This fault gets logged by BCM when Right Stop lamp output is shorted to battery or open circuit Normal Operating Condition Stop Lamp / Brake Lamp come ON when brake is pressed. Probable Trouble Area 1. BCM connector Fault 2. Right Stop lamp output wire Short to battery or open circuit 3. Right Stop Lamp bulb blown /lamp damaged 4. BCM ECU fault 5. Right Stop lamp mating connector fault Healing Condition 1. Ignition OFF ON 2. Clear DTC Command Component Details: Right Stop lamps are located at right rear side of vehicle. Stop Lamp / Brake Lamp come ON when brake is pressed. Preliminary Checks: 1. Check Battery Voltage (12.5 V & above) 2. Check ECU pins for oxidation, bending & damage. Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz