Vehicle Platform: OSPREY ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 1.4 Date: 15 May 2018 Author: Body CoC Page: 82 of 855 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. DTC’s confirmation:- After rectification, ensure the following points before handing over the system to the customer 1) Battery Voltage is between 9 to 16V. 2) Replacement of ECU. 3) Drive the vehicle on road and check the assistance. Circuit Schematic Diagram:- N/A Component Location & Image:- N/A Connector Location: - N/A Connector View & Information: - N/A Inspection Method: - N/A Yes No Is there same DTC observed? Replace the ECU Stop Reset the ECU. Remove the BCM ECU power supply connector from ECU and reconnect after about 5 minutes 1. Clear the DTC from the memory 2. Turn the ignition switch off and again turn it on and start the engine. 3. Check for DTCs A
RkJQdWJsaXNoZXIy MTIwNTUz