Vehicle Platform: Tiago,Tigor & Osprey ECU Name: Hella Body Control Module (BCM) DTC Troubleshooting Data Version: 2.0 Date: 22-10-2018 Author: Parag K Page: 636 of 737 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. B2256- 14: Wiper High/Low Relay Short to Ground/ Open Overview: ISO Code (DTC Code) B2256- 14 Customer Symptom Front Wiper is always operate in High speed mode when user request low speed mode through combi switch. Fault Effects (On Vehicle) 1. Front Wiper will always operate in high speed mode when requested. Lamp Status (If Any) NA Fault Detection Condition This fault will logged with IGN ON Normal Operating Condition IGN ON and No DTC logged. Front wiper operated in low speed and high speed as per switch request. Probable Trouble Area 1. BCM connector Fault. 2. Front harness Short to Ground. 3. Relay fault. 4. ECU fault. Healing Condition 1. Switch request after fault removal 2. Clear DTC command- No DTC logged Component Details: BCM drives the wiper motor in Low/ High speed through this relay(speed selection) by providing GND to the relay coil. Hence in case this output is shorted to GND the relay will be continuously ON(If the relay is ON, it will drive the wiper motor in Fast speed). Hence whenever User will switch ON the wiper, the wiper motor will switch ON in fast speed mode. Preliminary Checks: 1. Check Battery Voltage (9V-16V) 2. Check ECU pins for oxidation, bending & damage. Trouble Shooting:-
RkJQdWJsaXNoZXIy MTIwNTUz