Q501 4 Cylinder MT Application DTC Troubleshooting Data Version: 0.1 Date: 21-Sep-2018 Prepared By: Mithi Prasad, Sarang Kulkarni, Manish Gupta Checked By: Yogesh Jadhav Approved By: Satish Kumar P Page: 147 of 1052 Copyright © TATA MOTORS Ltd. This document must not be used in any way, such as copying and redistributing to third parties, without the consent of author. Trouble Shooting: Step Checks IF YES IF NO 1. Check whether the EMS ECU is receiving supply and Ground Go to step 2 Rectify wiring harness connections as per schematic 2. Check air and fuel system Got to step 3 Repair the failure 3. Run DPF regeneration and complete the action Got to step 4 Got to step 5 4. Clear the DTC no fault indication lamp on instrument cluster - Go to step 5 5. If fault still persists Call Hotline Repeat above procedure for reconfirmation DTC’s confirmation: After rectification, Test Drive the vehicle for 2 KM and ensure that no DTC’s are logged in ECM. Call Hot Line and check whether the fault is rectified or not. Circuit Schematic: NA Component Location & Image:- NA Connector View & Information: - NA
RkJQdWJsaXNoZXIy MTIwNTUz