ENGINE 115 7. Remove bonnet latch reinforcement cover (1) by removing the bolts. 8. Remove the bolt (1) of oil mist separator with bracket and place the oil mist separator properly for easy removal of radiator. 9. Loosen and remove the Radiator top mounting screw (1), along with the washer (2) and grommet (3) of both sides. 10.Tilt the radiator inwards and lift the radiator and condenser assembly from the grommet (1) on the bottom mounts, both LH and RH simultaneously. 11.After removing the radiator and condenser assembly out, separate the condenser from the radiator, refer Condenser removal process. FITMENT For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. Refer engine tightening torque section. • Radiator top mounting M10 bolt– (4.6 Kg-m) • Refrigerant lines on condenser M6 bolt– (0.9 ~ 1 Kg-m)
RkJQdWJsaXNoZXIy MTIwNTUz