ENGINE 114 2.1.5.4 MAINTENANCE 2.1.5.4.1 ON VEHICLE REPAIRS: A. RADIATOR REMOVAL 1. Drain the coolant and remove the Auxiliary Coolant tank. (For procedure refer “Coolant replacement” in Engine maintenance section) 2. Disconnect the radiator top hose at radiator end. 3. Remove the bottom hose at the thermostat end. 4. Discharge the refrigerant using standard recovering equipment. 5. Loosen and remove the bolt (1) and disconnect the refrigerant inlet pipe (2) to condenser. (Follow necessary instruction for evacuating the HVAC system, refer HVAC Section) 6. Loosen and remove the bolt (1) and disconnect the refrigerant outlet pipe (2) to condenser. ! CAUTION Never leave the condenser lines open, immediately cover them with caps, otherwise the desiccant which is in-built in the condenser may absorb the moisture from surrounding air and get contaminated
RkJQdWJsaXNoZXIy MTIwNTUz