FRONT SUSPENSION 24 3. Place the drift between the Upper Wishbones as shown in figure. 4. Place the base between the drift and upper wishbone and insert the Extension through the rubber bush and lock it with the base. 5. Press the Extension with the hydraulic press and take out the Wishbone bush. NOTE Follow the same procedure for bush removal at other end. INSTALLATION 1. Install the Upper Wishbone suspension bush using special tool assembly (Part No. 2870 5890 01 11) as shown in below arrangement. 2. Take a tool holding structure stand and place the support along with the guide bush on the stand.
RkJQdWJsaXNoZXIy MTIwNTUz