FRONT SUSPENSION 23 II FRONT DAMPER BOTTOM BUSH 1. Remove the front damper bottom bush using special tool assembly (Part No. 2870 5890 32 58) as shown in below arrangement. 2. Place the lower bush on bottom support (2) as shown in below image. 3. Place the Dolly on bush (1) as shown in below image. 4. Press the Dolly with the sufficient pressure and take out the bush. INSTALLATION 1. Install the damper bottom bush using special tool assembly (Part No. 2870 5890 32 58) as shown in below arrangement. 2. Place the lower bush on bottom support (2) as shown in below image. 3. Place the spacer (3) on bush as shown in below image. 5. Place the dolly (1) and Press with the sufficient pressure to fit the bush. III UPPER WISHBONE BUSH REMOVAL 1. Remove the Upper Wishbone suspension bush using special tool assembly (Part No. 2870 5890 01 12) as shown in below arrangement. 2. Mount the upper wishbone assembly on to the fixture and lock the same by tightening the socket head screws (4 Nos.) of the upper plate and tighten the grab screw (3 Nos.) of the support to lock the bush housing for any movement while pressing out the bush.
RkJQdWJsaXNoZXIy MTIwNTUz