FRONT SUSPENSION 25 3. Place the Upper Wishbone on the Support and mount the bush on the bush housing. 4. Place the Drift over the bush and press the same by using hydraulic press so as to insert the bush in the upper wishbone. IV UPPER WISHBONE BALL JOINT REMOVAL 1. Loosen and remove the Upper wishbone ball joint mounting nuts (as shown in below figure) using spanner. INSTALLATION Follow the reverse procedure for removal. NOTE Care to be taken for ball joint boot when tightening ball joint on wishbone from damaging. V LOWER WISHBONE BALL JOINT REMOVAL 1. Loosen and remove the lower wishbone ball joint mounting nuts (as shown in below figure) using spanner. INSTALLATION Follow the reverse procedure for removal.
RkJQdWJsaXNoZXIy MTIwNTUz