TOD 33 NOTE The groove provided on the collar should be towards the input shaft. 2. Align rotor slot of the pump and slot of the pump body in line. NOTE Use key aligner for inserting rotor assembly on to the output shaft. The slot of the rotor should be inline with the sleeve on to the output shaft as shown in next step. 3. Slide the pump assembly on the output shaft over pump pin. 4. Slip hose clamp over free end of hose coupling with strainer and push onto hose barb on pump and tighten. 5. Install snap ring on to the output shaft, if removed. 6. Install the output shaft splines into the spacer (Collar) and engage the output shaft end with input shaft bearing.
RkJQdWJsaXNoZXIy MTIwNTUz