TOD 34 7. Install washer thrust onto the output shaft. 8. Couple strainer with case and insert the magnet into the transfer case slot. D. CHAIN DRIVE 1. Holding each sprocket with drive chain tight and parallel with transfer case, install the drive chain assembly with sprockets to the output shafts. NOTE The chain lock should face towards the upward direction. The groove provided on the sprocket of the lower output shaft should be in upward direction. 2. Rotate the driven sprocket slightly to engage splines on the front output shaft.
RkJQdWJsaXNoZXIy MTIwNTUz