GEAR BOX 6450 45 C. Measure the height of taper roller bearing extruded from front housing. Let this be “E”. D. Measure the depth of front cover face to taper roller bearing resting face (with paper gasket). Let this be “F” E. SHIM THICKNESS (V) = F + 0.02(BEARING PRELOAD) – E. F. For the second shim selection for highlighted parts as shown below. G. After tightening the hexagonal counter shaft screw measure the height of Double Row Angular Contact Bearing (DRACB) extruded from front housing. Let this be “G”. H. Measure the depth of the front cover to double row angular contact bearing resting face (with paper gasket). Let this be “H”. I. SHIM THICKNESS (U) = H - G. 54. Install the oil seal in front gear case cover by using proper tool (Part No: 5403 5890 26 10)
RkJQdWJsaXNoZXIy MTIwNTUz