GEAR BOX 6450 46 55. Place the selected shim dimension (“V” AND “U”) in front gear case cover. 56. Place the gasket over the front gear case cover parting surface. Assemble the same to the gearbox assembly. 57. Place the coupling flange. 58. Tighten the flange nut by using tool (Part Number: 2698 5890 41 01) with the torque of 22 Kg-m. NOTE: Before tightening the coupling flange of gear box make sure double locking is done (reverse gear and second gear need to be engage by pushing dogs forward as shown in fig) for locking of main shaft. 59. For 4X4 Place the lock washer on main shaft.
RkJQdWJsaXNoZXIy MTIwNTUz