ELECTRICAL 97 8.8.11 REAR WASHER NOZZLE LOCATION: It is fitted on the outer tailgate spoiler. REMOVAL 1. Remove the tail gate spoiler. 2. Disconnect the washer hose from the rear nozzle. 3. Pry out the nozzle from out side the tail gate. NOZZLE SETTING: 1. Check the water jet spot on the tailgate glass if it is on glass as shown in the below fig then OK. 2. If spot of the jet is not proper then adjust the nozzle angle manually such that both the jets should fall on tailgate glass. REFITMENT: 1. Insert the nozzle into the cutout provided on the panel tailgate outer. 2. Connect the washer hose from inside of tailgate panel to nozzle. 3. Fit the high mounted stop lamp mounting screws. 4. Snap fit the tail gate spoiler. NOTE: Rear nozzle should be fitted properly in the cutout and there should not be any lateral movement. Check that there is no damage in the lock area and no missing lock in the rear nozzle.
RkJQdWJsaXNoZXIy MTIwNTUz