ELECTRICAL 96 8.8.10 FRONT WASHER NOZZLE LOCATION: There are two nozzles at front fitted on leaf screen. Nozzles are snap fitted. REMOVAL 1. Remove leaf screen, Pry out the front nozzle from its snap fitting. 2. Pull out the nozzle assemble from the cutout and disconnect the washer hose. INSPECTION: Blow air in the injection direction and make sure that air flows only one way. Make sure that the reverse direction is not possible. Check periodically nozzle for air trapping / dust entry. NOZZLE SETTING: 1. See the water jet spot, if it is in the middle zone of the windscreen as shown in below fig then OK. 2. If the water jet is not at the middle of windscreen screen, then adjust the nozzle tip angle manually such that water jet spot should be at the middle of windscreen glass. 3. All four jet should be on same level. REFITMENT 1. Pull out the washer hose from the cutout and connect to the washer nozzle. 2. Snap fit the nozzle into the cutout.
RkJQdWJsaXNoZXIy MTIwNTUz