SAFARI BSVI SERVICE MANUAL

KRYOTEC ENGINE 89 28. Install the rear engine mount isolator bracket (1) with the bolts tightened to the proper (Torque Specifications). 29. Install the rear engine mount isolator (2) with the bolt tightened to the proper (Torque Specifications). 30. Install the rear engine mount isolator to front cross member bolt (3) and tighten to the proper (Torque Specifications). 31. Install a new flange gasket and connect the exhaust pipe to the Diesel Particulate Filter (DPF) with new nuts (1) tightened to the proper (Torque Specifications). 32. Install the exhaust pipe support bracket bolt (2) and tighten to the proper (Torque Specifications). 33. Install the exhaust pipe hanger bolts (1) and tighten to the proper (Torque Specifications). 34. Install the right front head lamp (Refer to 08 - Electrical/Lamps/Lighting - Exterior/UNIT, Front Lamp/Removal and Installation). 35. Install the left front head lamp (Refer to 08 - Electrical/Lamps/Lighting - Exterior/UNIT, Front Lamp/Removal and Installation). 36. Install the air intake pipe to the turbocharger with the clamp tightened to the proper (Torque Specifications). 37. Connect the engine oil vapor hose to the tube side with the clamp tightened to the proper (Torque Specifications). 38. Install the MAF sensor to the turbocharger air inlet pipe with the clamp tightened to the proper (Torque Specifications). 39. Connect the Mass Air Flow (MAF) sensor wire harness connector. 40. Install the fuel filter (Refer to 14 - Fuel System/Fuel Delivery/FILTER, Fuel/Removal and Installation). 41. Install the air cleaner body (Refer to 09 - Engine/Air Intake System/BODY, Air Cleaner/Removal and Installation). 42. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 43. Install the right and left lower load beam (Refer to 13 - Frame and Bumpers/Frame/LOAD BEAM, Lower/ Removal and Installation). 44. Install the front bumper reinforcement and tighten the bolts to the proper (Refer to 13 - Frame and Bumpers/ Technical Specifications). 45. Install the battery tray (Refer to 08 - Electrical/Battery System/TRAY, Battery/Removal and Installation).