TIGOR

BRAKES 47 EXPLODED VIEW OF WHEEL CYLINDER ASSEMBLY ITEM NO DESCRIPTION 01 BOOT/DUST COVER 02 PISTON/PLUNGER 03 L TYPE SEAL 04 SPRING 05 BLEED SCREW 06 BLEED SCREW CAP 07 PROTECTIVE PLUG 08 WHEEL CYLINDER BODY REMOVAL OF WHEEL CYLINDER 1. Remove bleed screw cap, bleed screw and protective plug 2. Pump out the brake fluid in a suitable container by operating the brake pedal. 3. Remove boot/ dust cover 4. Push out the piston with seal’s. 5. Remove the seals from the plunger using a blunt edged connector. 6. Discard all rubber parts. 7. Clean all parts in fresh brake fluid or alcohol and place them on clean sheet of paper. NOTE Never clean the wheel cylinder or internal parts with kerosene, petrol or diesel as it will lead to contamination and damaging the rubber part.