TIGOR

1.05L REVOTORQ ENGINE 102 Fitment: Follow the reverse order of removal for fitment. NOTE  Orientation of Pressure regulator should be Arrows towards Delivery Line & vehicle Front. A. Return Line B. Delivery Line + Pressure Regulator Inlet C. Dead Plug D. Pressure Regulator E. Mounting Screw F. Mounting Bracket D. Tank Unit: Removal: CAUTION  Unless replacement is necessary, Tank unit, Fuel level sensor should not be removed from the tank since the rubber parts i.e. gasket, seals etc. may harden when exposed to air and light.  Never apply an excessive force to the tank unit nipple or lead wire. This may result in bent or poor contact. 1. Fold the 2nd row RH seat and somersault it to access the in tank pump cut out. 2. Lift the carpet with foam at the cutout. 3. Loosen and remove the screw of the cutout cover and remove it. 4. Disconnect the connector and then disconnect the fuel lines.i.e. Return line (From pressure regulator to tank unit (1)), Delivery line (From tank unit to pressure regulator (2)), Return line (From tank unit to engine (3)).