NANO

654 ELECTRICAL 3. Remove the electrical connectors and take out head lamp assembly. INSPECTION 1. Check the connectors for any loose terminals or wires broken at the terminal ends. HEAD LAMP : EXPLODED VIEW REMOVAL & REFITMENT OF HEAD LAMP : REMOVAL 1. Open the front bonnet. 2. Remove two bolts securing headlamp assembly to the body. Front Direction Indicator : The head lamp system provide two types of light; one Main Beam to give maximum light well ahead of the vehicle, and a Dipped Beamwhich is shorter and lower so that it will not dazzle on oncoming drivers, and can be used in low visibility area. Dipped Beamwith leveling adjustment allows driver to focus required area with Laden Vehicle Inclination. Separate filaments in a single bulb in each Head Lamp provide the Main & Dipped Beams Bulbs are made with accurately located filaments and a locating flange, so that when fitted into reflector, which is permanently bonded together with lens, the bulb is always at focus. The design ensures that bulb can be fitted only in the correct position. The Head Lamp also has a parking lamp.