NANO

650 ELECTRICAL CONDITION POSSIBLE CAUSES CORRECTION/REFERENCE ITEM 6 .STOP LAMP Single stop lamp not working 1) Grounding point loose Tighten grounding properly 2) 6 pole connector from floor Fix the connector properly W/H to Rear cluster lamp loose 3) Bulb loose/fused Fix the bulb properly. Replace bulb if blown Both stop lamps not working 1) Stop lamp fuse (10A) in Fix fuse firmly in the base. cabin fuse box loose / blown Replace if blown 2) Connector (18 pole) from Fix the connector properly Cabin W/H to Floor W/H loose 3) Adjustment of stop lamp Adjust the switch to correct switch not proper setting 4) Brake lamp switch faulty Replace switch 7. REAR TURN SIGNAL LAMPS Rear right / left turn signal 1) Grounding point loose Tighten grounding properly lamps not working 2) Bulb loose / fused Fix the bulb properly. Replace bulb No indicator lamp is working 1) Flasher fuse (20A) in cabin Fix fuse properly in the base Replace fuse box loose/blown fuse if blown 2) Flasher in cabin fuse box Replace Flasher faulty 3) Connector at Hazard Fix the connector properly Warning Switch loose 8. REAR FOG LAMP Single lamp not working 1) Grounding point loose Tighten grounding properly 2) 6 pole connector from Floor Connect the terminal properly W/H To Rear cluster lamp loose 3) Bulb loose / fused Replace Fix bulb properly in holder. bulb if blown Rear fog lamp switch symbol not 1) Bulb loose/fused Fix bulb properly. Replace if blown lighting Rear fog lamp switch on indication 1) Bulb loose/fused Fix bulb properly. Replace if blown not lighting blown Both legend and on-state 1) Bulb loose/fused Fix bulb properly. Replace if blown indication not lighting for rear fog 2) Grounding near side Tighten the grounding properly lamp switch repeater lamp RH is loose