NANO

ELECTRICAL 649 ELECTRICAL CONDITION POSSIBLE CAUSES CORRECTION/REFERENCE ITEM 3. FRONT TURN SIGNAL LAMPS Front right / left signal lamps not 1) Grounding point in engine Tighten the grounding properly working compartment loose 2) Connector at the lamp Fix the connector properly (2 pole) loose 3) Bulb loose/fused Fix the bulb properly. Replace bulb if blown 4. REVERSE LAMPS Single reverse lamp not working 1) Grounding point loose Tighten grounding properly 2) Bulb loose/fused Fix the bulb properly. Replace bulb if blown 3) 6 pole connector frommain Fix the connector properly W/H to Rear Cluster Lamp loose. Both reverse lamps not working 1) Reverse lamp fuse (10A) in Fix the fuse in the base firmly. If blown, cabin fuse box loose / blown check for short in the circuit and then replace the fuse 2) Reverse lamp switch faulty Replace reverse lamp switch 5. PARKING LAMPS Single parking lamp rear not 1) Grounding point loose Tighten grounding properly working 2) Parking lamp LH/RH fuse Fix the fuse in the base firmly. If blown, (10A) in cabin fuse box loose/ check for short in the circuit and then blown replace the fuse 3) 6 pole connector from floor Fix the terminal properly W/H to Rear cluster lamp loose 4) Bulb loose / fused Fix the bulb properly. Replace bulb if blown 5) Battery supply not reaching Check the continuity from battery to parking lamp LH/RH fuse the lamps through the combi-switch, input Front W/H and Floor W/H connectors and rectify the discontinuity in the circuit Both parking lamps not 1) Combi switch connectors Fix the connectors properly working at all loose/20 pole connector from Front W/H to Cabin W/H loose 2) Combi switch faulty Replace combi -switch