NANO

DRIVETRAIN 401 DRIVETRAIN 12. Place the oil collector in the rear cover, such that the groove in the rear cover aligns with the groove in the oil collector. Make sure that the fit is not loose. 13. Apply liquid sealant and place the rear cover and tighten the bolts to a torque of 2.1 ~2.5 Kgm. 14. Smear the interlock pin with grease and place it in its slot. (Grease is applied to hold it in the slot.) 15. Apply the sealant and place the top cover on the rear half housing. 16. Tighten the M 8 bolts to a torque of 2.1 ~ 2.5 Kgm.