NANO

400 DRIVETRAIN 9. Tighten the reverse idler M8 bolt to a torque of 2.3 kg m. 10. Lift the Shifter dogs accessible through the top cover using a screw driver to get the input and lay shaft ball bearing grooves protrude out. 11. Fit the circlip onto the deep groove bearings. 6. Apply the liquid sealant to the front half mating surface. 7. Place the rear half housing assembly on the front half , such that the mating surfaces match properly. 8. Apply thread lock gum to the thirteen M8 bolts fastening the front half to rear half and tighten them to a torque of 2.1 ~ 2.5 Kgm.