NANO

378 DRIVETRAIN 6. Assemble the spring, carrier and ball, along with the engaging gear into the Shifter Sleeve (1 st and 2 nd gear). 7. Place the Shifter sleeve along the engaging gear assembly on the shaft, on the synchro cone. Groove is towards First gear side. 8. Place the synchro cone on the second gear and measure the gap between the second gear and the synchro cone using a feeler gauge. This gap should be within 1.15 ~1.40 mm 9. Place the synchro cone first on the shifter sleeve, with projected side facing downwards and then place the second gear on it.