NANO

ELECTRICAL 5 Removal of Drive and gear Assembly and housing assembly  Remove the Solenoid as per the above procedure.  Remove the Brush Holder as per the above procedure.  Remove the frame as per the above procedure.  Remove the armature  Remove the Drive and gear assembly by hand .  Remove housing assembly. NOTE  While removing the drive and gear assembly care should be taken that the lever does not get entangled and damaged.  Care should be taken to retain the drive stopper cup from falling off from the drive shaft. 3. Fitment of Drive and gear assembly  Apply grease at the output shaft end, lever pocket, lever as per the specification.  Drop the drive and gear assembly into the housing assembly.  Assemble the seal into the pocket. NOTE  Ensure no damages on mounting surface of the housing.  Ensure no dirt inside the bushings on the housing.  Ensure that the dowel is present on the housing.  Ensure no damages to the pinion teeth  Ensure drive stop C ring and cup are present. 9