HEXA

REAR SUSPENSION 18 2. Mount the Pan Hard Rod bush housing on to the support. 3. Place the drift above and press the same using press machine to push out the bush from Pan Hard Rod bush housing. INSTALLATION 1. Install the Pan Hard Rod bush using special tool assembly (Part No.2870 5890 01 09). as shown in below arrangement. 2. Place the guide bush & mount support over the guide bush. 3. Place the Pan Hard Rod bush housing over the support. 4. Place the bush over the bush housing. 5. Place the drift on the bush and press the same to install the same to install the bush in the Pan Hard housing. NOTE Apply soap and water to the bush, the inner surface of the tool and the bore of assembly Pan Hard Rod before installation.