HEXA

FRONT SUSPENSION 20 14.5 OVERHAULING A PRECAUTIONS 1. Since all suspension fasteners are critical in suspension attachments with regard to performance and safety of vehicle, these must be replaced with one of the same part number in case of replacement. 2. Torque values must be maintained as specified during reassembly for proper retention of the parts. The replacement parts should be of the same quality as of the designed parts. 3. Damaged parts should be replaced only with new parts. Welding, straightening or any other form of repairing should not be attempted. 4. Lower arm bushes are to be aligned properly while fitment. 5. Care should be taken while handling spring loaded suspension components. 6. Front and rear bushes of lower wishbone are different. So care has to be taken while assembly the bushes. NOTE All suspension links, anti-roll bar, shock absorber mountings to be full tightened in vehicle ECIE condition.(2 persons in front seat, two persons in rear middle seat) B DISMANTLING, INSPECTION AND ASSEMBLY I. FRONT STRUT DISMANTLING./ DAMPER REPLACEMENT 1. Mount shock absorber firmly on a vice. 2. Using the special tool (Part No. 8855 2702 00 40) Fix both spring compressor tool hooks to spring in opposite direction.