HEXA

TOD 29 G. ADAPTER, INPUT SHAFT AND CARRIER ASSEMBLY 1. Remove five bolts of adapter. 2. Remove the adapter by separating the adapter sealer bond (Pry front adapter, take care not to damage the adapter or the case). 3. Expand long ends of the snap ring using snap ring plier (Part No. 2870 5890 26 03) and pull out the input shaft assembly from the adapter. 4. Remove the oil seal (1) from front adapter (2) . 5. Remove snap ring by using a tool. 6. Pull out the bearing (1) with suitable puller and remove the spacer (2) from the input shaft.