HEXA

TOD 22 2. Remove bolts (1) and remove ‘J’ clip (2) and harness bracket (3) . 3. Insert a thin pointed object into the connector and press down the locking strip and pull out from the sleeve by pushing the connector outwards. 4. Remove the mounting screws (13 Nos.) of cover assembly. 5. Remove oil seal (1) and take out the spacer (2 6. Pry at the bosses provided on the cover and the case to break the sealant bond of the cover and the transfer case in such a way that the metal surface is not damaged. 7. Remove the snap ring and push out the ball bearing from the cover using a drift (Part No. 287058902606.)