HEXA

OIL COOLER 60 7. Remove all the clips and take out the liner front wheel house outer from the vehicle. 8. Loosen and remove two mounting screws from the wheel cladding. Follow the same procedure at the other end also. 9. Remove cladding support bracket LH and RH. 10. Loosen and remove two mounting screws, access the screws from the wheel arc end. Follow the same procedure at other end. 11. Removal of three mounting screws & washer from the mid area of the bumper. 12. Disconnect fog lamp connectors and remove the bumper by unsnapping at 4 locations (i.e. Bumper holding bracket LH/RH at fender location and Head lamp mounting bumper support bracket LH/RH).