HEXA

TRANSMISSION 40 31. Loosen the two crossbar nuts by using a H18 wrench. NOTE: Not remove the crossbar screws. 32. Support the transmission using transmission support jack and secure it with the safety chains. 33. Remove the 6 crossbar screws and remove the crossbar. 34. Loosen the 8 No’s converter housing screws using a H14 wrench. 35. Carefully lower the transmission from the vehicle. Do not touch the flex plate. WARNING : Damage to the flex plate could involve in malfunction of engine and or transmission. Ensure clearance is maintained between the transmission and the following: -Vehicle wiring harness. -Vehicle to transmission cooler pipes. 36. Tilt slightly the transmission 4° to 4.5° inclination angle converter housing keep upside.