HEXA

TRANSMISSION 37 11. Loosen the 3 starter motor screws by using an H14 wrench and remove the starter motor with its cover. 12. Let the vehicle down to access to the air filter. 13. Loosen the screws (5) and remove the air filter assembly. 14. Turn the crank pulley using a H19 wrench CLOCKWISE ONLY until the first screw is visible in starter hole. 15. Loosen the screw (6) by using a H14 wrench. 16. Repeat the operation for each of the 6 screws and discard the screws. 17. Before moving last bolt, push it slightly to loose converter from flex plate and move converter backward in transmission. 18. Lift the vehicle to access to the transmission. 19. Loosen the screws by usingH8 wrench and remove the front propeller shaft from transfer box. 20. Loosen the screws by using H8 wrench and remove the rear propeller shaft from transfer box. 21. Using a H9 wrench, turn the selector shaft out of park to allow propeller shaft turning and access to the other propeller shaft screws.