HEXA

TRANSMISSION 8 Driver Selectable Purpose Default (D) Mode Selector lever in the D position Drive range should be used for all normal driving conditions for maximum efficiency and fuel economy. Drive range allows the transmission to operate in each of the 6 forward gear ratios. Downshifts to a lower gear, or higher gear ratio, are available for safe passing by depressing the accelerator or by manually selecting a lower gear in the manual mode range. Sports Mode, selector lever pushed into Manual gate Commands Gearbox to shift at higher engine rev vs Default Pattern to provide more dynamic feel. Performance of engine is not changed. Sport pattern is maintained until shifter is moved back in D or operated in manual Gate +/-( see next ) Manual mode selector lever in Manual Gate pushed Up / pulled Down Driver will be available to select gear on demand. The transmission will only allow you to shift into gears appropriate for the vehicle speed and engine revolution per min. 1stor 2Ndgear can be select from stop. Gear is hold depending vehicle speed. Base Function Purpose Torque Converter Clutch control Torque Converter Clutch will operate in open, slip or lock mode depending gear and loads. Improve fuel economy and drivability by reducing torque converter slip. Function is not activated in first gear. Altitude Compensation Provide consistent Gear Shift quality and Performance at high altitude Adaptive Shift Parameters The purpose of the adapt function is to automatically compensate the shift quality for the various vehicle shift control systems. The adapt function is a continuous process that will help to maintain optimal shift quality throughout the life of the vehicle. Uphill/ Downhill mode TCU detect a grade change based on loads and adjust typical pattern to maintain optimal gear selection for performance and drivability. Hot mode Is activated when vehicle driving condition or cooling issues generate an abnormal elevation of transmission temperature above 132°C. This mode affects the default pattern.