HEXA

GEAR BOX 62 26.Align the shifter linkage assembly properly with the shifting yoke and then slide the cylindrical pin and press the retainer clip to lock the shifter link along with the extension arm on to the gear box. NOTE  Apply grease on the spherical seat of shifter shaft end.  Check the condition of bush in the shifting yoke. 27.Remove the pin and nut of extension arm from gear box. 28.Fit the magnetic drain plug, breather assembly and reverse indicator switch. 29.Align the clutch housing. Place the spring and bright washer and tighten the clutch housing mounting bolts. 30.Fit the clutch release bearing and clutch release fork. (For procedure refer clutch section.)