HEXA

GEAR BOX 48 4. Pull out and remove the plug from speedo drive. 5. Press out the speedo drive shaft with suitable punch and take out the speedo drive pinion (if fit- ted). INSPECTION  Check for the cracks on rear cover housing.  Check for any damage to speedo gear assembly. ASSEMBLY 1. Keep the speedo drive gear in the cavity and push the speedo shaft. 2. Fit the oil seal in the adaptor keeping the lip side outwards and tighten the adaptor on to the rear cover. 3. Press the plug- speedo drive in the housing from the other end. Ensure gap of 1mm between plug face to speedo shaft end. 4. Fit the oil seal with the help of drift (Part No. 2654 5890 26 07) and handle (Part No. 2640 5890 35 11). NOTE Fill 3% grease Mo S2 320 in the pocket between main lip and dust lip of oil seal. H. ADAPTOR (4X4) (If Applicable) DISMANTLING 1. Remove the main shaft oil seal from rear cover with the help of suitable drift. ASSEMBLY Fit the oil seal with the help of drift (Part No. 2654 5890 26 07) and handle (Part No. 2640 5890 35 11) on the adaptor.