HEXA

CLUTCH 30  FITMENT 1. Introduce the CMC into the bayonet adapter hole through slots (matching the bigger slot of CMC and bayonet adapter) and turn it 45º anti- clockwise to tighten it.  NOTE  Be careful not to damage the master cylinder body while fitment.  Ensure that CMC is not over tighten and also not kept loose. 2. Push the pedal in order to align CMC pushrod fixing hole and pedal fixing hole. Fix the CMC push rod by fitting the clevis pin and split pin. 3. Connect the low pressure hose to CMC and reservoir end and fix them with hose clamps. 4. Fit the high pressure pipe to the CMC end by simply pushing it into the CMC end.  NOTE  Ensure that a click sound is heard for proper fitment of hose at CMC end.  No crack, breakage after turning CMC – LPP transition area.  Make sure CMC is completely mounted in anticlockwise direction by checking locked (or) not.  After installation of clutch master cylinder bleed the system. (For procedure refer clutch bleeding from this section)