HEXA

ENGINE 105 4. Loosen and remove fuel filler pipe clamp bolts. 5. Take out fuel filler assembly from body shell. WARNING  A small amount of fuel may be released after fuel lines are disconnected. To avoid the chance of injury, cover the pipe to be disconnected with cotton cloth. Do not use cotton waste . CAUTION  To avoid damage to vapour hoses while disconnecting, slide back the clamps then twist the lines as you pull . FITMENT : Follow the reverse order of removal for fitment. O. Fuel Tank : Removal : 1. Place the vehicle in a 2 poster lift. 2. Disconnect the electrical connections of the in- tank pump and the fuel lines. Refer In-tank pump removal process. 3. Raise the vehicle and drain the fuel. NOTE : • Ensure that the drain plug is refitted after the fuel is being drained. • Refit new washer in drain plug and apply specified torque (4 Kg-m). 4. Disconnect the fuel filler hose (1) and the breather hose (2). 5. Support the fuel tank from below. 6. Remove the front mounting bolts (1), mounted from top