HEXA

ENGINE 100 8. Remove the intercooler inlet pipe bracket from radiator by loosening the bolts. 9. Loosen and remove the LH radiator top mounting screw (1), along with the washer (2) and grommet (3). Similarly remove the RH mounting screw. 10. Tilt the radiator inwards and lift the radiator and condenser assembly from the grommet on the bottom mounts, both LH and RH simultaneously. 11. After removing the radiator and condenser assembly out, separate the condenser from the radiator, refer condenser removal procedure. Fitment : For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. Refer engine tightening torque section.  Radiator top mounting M10 bolt – (4.6 kg-m)  Refrigerant lines on condenser M6 bolt – (0.9 1 kg-m)