HEXA

GENERAL 9 2.6 SPARE WHEEL REPLACEMENT 1. Open the tail gate and open the load cover and t take out the tools tray. 2. Take out the spare wheel arrestor by pulling it upwards. 3. Pull out the rear tow hook cover and remove the same. 4. Insert the spare wheel handle with extension through the window. Rotate the handle anti- clockwise to lower the spare wheel till it rests on the ground. 5. Remove the holding bracket from the spare wheel and separate the same from the vehicle. 2.7 EMERGENCY TOWING INFORMATION For towing, the best way is to use a wrecker ( A vehi- cle used to tow away broken-down vehicles ); alternatively, a rigid tow bar can be used. Avoid us- ing a flexible cable or rope as your vehicle may crash into the towing vehicle when it stops suddenly. In addition, do the following: 1. Release parking Brakes. 2. Shift the gear to neutral. 3. Switch ‘ON’ the hazard warning signals of both the vehicles to warn other road users. 4. Wherever possible, keep engine running so that power steering assistance and brake vacuum are available. 5. Limit the speed to 20-30 Kmph. 6. In case of brake failure, use the parking brake to control the vehicle. NOTE  Towing procedure for Automatic Transmission vehicle with Drained or Disconnected Battery “is mentioned in Automatic Transmission section.  If the vehicle needs to be towed, call professional towing service  If it is not possible to shift the gear to neutral, then disconnect the propeller shaft and remove it be- fore towing.  If it is not possible to shift the transmission or start the engine or if the wheels are jammed, the vehicle must be transported on flat bed truck, where the vehicle is loaded into the back of a truck. ! CAUTION Trying to lift or tow the vehicle by bumpers will cause serious damage. The bumpers are not designed to support the vehicle’s weight .