HEXA

ELECTRICAL 135 8.9.7 BONNET SWITCH FUNCTION: Bonnet switch is switched on or off in response to opening and closing of bonnet. LOCATION: It is fitted on Hood latch platform. REMOVAL: 1. Open the bonnet and remove one mounting screw of bonnet switch. 2. Disconnect the electrical connection and take out the switch along with bracket. INSPECTION: Test the switch with a Multimeter. Clip the probe of the multimeter to switch terminal and check the continuity. CONDITION SPECIFIED Not Pushed(ON) Continuity Pushed(OFF) No continuity If not as per specified condition, then replace the switch. REFITMENT: 1. Fit the bonnet switch on the bracket. 2. Tighten one mounting screw. Tightening toque for screws – 0.5 – 0.7 Kgfm 3. Connect the electrical connection to the bonnet switch.