HEXA

ELECTRICAL 129 3. Remove window winding switch Trim with switch by removing the shown 3 torex screws. 4. Separate out the window winding switch from trim by removing its 5 mounting screws. 5. Take out switch. INSPECTION: Window Winding switches: 1. Check the basic function ( Manual operation function) .  Turn the ignition switch ON.  Check that the door glass move up when the power window switch from driver door switch is pulled UP and moves down when the switch is pushed DOWN.  Check that the door glass moves up when the individual power window switch of each door is pulled UP, and moves down when the switch is pushed DOWN. 2. Check the auto down operation function.  Turn the ignition switch ON.  Check that the AUTO DOWN function operates to fully open the door glass when the power window switch from driver door switch is pushed DOWN.  Check that the door glass will stop when the applicable window switch is pulled UP during the AUTO DOWN operation. Child lock switch:  Check that the rear power window operation is disabled when the window lock switch of the power window master switch is pressed.  Check that the rear power windows can be operated when the window lock switch is pressed again REFITMENT: 1. Fit the power window switch on trim by tightening its five screws. Tightening torque for screws- 0.06 to 0.08 Kgfm 2. Fit the window winding switch trim. 3. Fit the upper fabric RH insert. 4. Fit the front door trim. NOTE: Same procedure is applicable for remaining door window winding switches.