HEXA

ELECTRICAL 84 FRONT AND REAR WIPER SYSTEM COMPONENTS: 8.8.3 FRONT WIPER MOTOR LOCATION The front wiper motor assembly is fitted on windscreen support panel. REMOVAL: 1. Disconnect the negative terminal of battery. 2. Remove both side wiper arm and blade assembly. (Refer wiper arm and blade assembly removal procedure) 3. Loosen and remove 8 no. of mounting screws of leaf screen. (Refer Body Group for detailed instructions) 4. Lift the leaf screen and disconnect the washer hoses from the nozzles and remove hose routing in the leaf screen. 5. Remove wiring harness routing from leaf screen. 6. Take out the leaf screen assembly. 7. Remove the wiper motor mounting bracket by removing three mounting bolts. 8. Disconnect the wiper motor connector and remove the connector from its parking. 9. Remove seven mounting bolts of wiper linkage. Shown in below figure. 10.Take out the wiper linkage assembly along with wiper motor. 11.Remove three mounting bolts of wiper motor and take out wiper motor from wiper linkage.