HEXA

ELECTRICAL 71 3. Disconnect the Electrical connection. 4. Remove the four mounting nut of lamp from behind the Tailgate. 5. Pull out the lamps from its location in forward direction. 6. Take out the lamp. REFITMENT: 1. Connect the electrical connection. 2. Align the Lamp with its mounting locations on panel. 3. Tighten its four mounting location with Nuts. Tightening Torque for the nut is 0.45 – 0.65 kgf-m. III.Rear Fog/Reverse with Reflex Lamp The Lamp is mounted in the lower part of the Rear Bumper. The Bulb used for the Rear Fog lamp function is PR21W Bulb 12V 21W and Reverse lamp function is P21W Bulb, 12V 21W. REMOVAL: 1. Remove the Rear Bumper (Refer Body Section) 2. Remove the energy absorber rear from the vehicle by removing clip metal of energy absorber. 3. Disconnect the Electrical connections of Rear Fog Lamp (RH Side) and Reverse lamp (LH Side)-For RHD Vehicle. 4. From back side of bumper remove the four mounting screws of Lamp assembly.