HEXA

ELECTRICAL 65 INSPECTION: 1. Check the filaments in the bulb if blown replace the faulty bulb. 2. Check for damages in the locks area. REFITMENT: 1. Connect the electrical connection. 2. Fit the roof lamp into cutout provided on roof console. ( snap fitted ) 8.4.7 THIRD ROOF LAMP Third roof lamp is fitted with a three-way switch. Switch has ON, OFF and DOOR positions. In the ON or OFF position, the lamp is directly controlled by the switch. In ON or OFF position, no lamp dimming is used. In the DOOR position, the lamp operation is controlled directly by the BCM. It consists of LEDs. REMOVAL: 1. Pry out the roof lamp assembly from the rear roof console. 2. Disconnect the electrical connection. 3. Take out the lamp. REFITMENT: 1. Connect the electrical connection. 2. Fit the roof lamp into cutout provided on rear roof console. ( snap fitted )