HEXA

ELECTRICAL 27 1.8 Fix Pulley Procedure: Component disassembly/check Tools required:  Swivel mounted clamping support: 0 986 619 362 1. Clamp component in clamping support. 1 = Clamping support. G2. 4 = Compact generator. Caution:  Take care not to damage or deform die cast aluminum housing.  Damage or deformation may impair the accuracy of fit of the individual components and cause damage.  Never use any objects to block the fan when assembling / disassembling the pulley. 2. Bent or defective fan blades will cause damage. 3. The component <Compact generator> of series Baseline is fitted with various pulleys: Pulley (without cover). Free wheel pulley (with cover). Note: Depending on the direction of rotation of the component < Alternator>, the component <Alternator rotor > and the pulley is provided with a right-hand or left-hand thread. < --- = Left-hand thread. --- > = Right-hand thread . Remove pulley: Tools required:  0 986 618 152 (Box spanner WAF 24), (KDLJ 6030).  Multi-point attachment M10, long. 1. Position socket wrench (2) on nut of pulley (1). 2. Use the multi-point attachment (3) to stop the rotor shaft, unfasten the nut using a box wrench and detach the pulley. Remove freewheel pulley: Tools required:  Assembly tool: 0 986 619 396.  Multi-point socket 17*20. 1. Remove cover of freewheel pulley. 2. The cap is either clipped on or inserted. 3. Clipped-on cover can be removed using a suitable tool. 4. Fitted cover can only be removed by piercing and prising out.