HEXA

STEERING 34 ii. BELLOW KIT : Dismantling: 1. Remove the OBJ assembly. (For procedure refer OBJ dismantling procedure.) 2. Remove the bellow small end strap using suitable tool. NOTE:  Discard the strap after removal and use new one at the time assembly. 3. Remove the bellow big end strap using suitable tool. NOTE:  Discard the strap after removal and use new one at the time assembly. 4. Pull out the bellow. INSPECTION:  Check the condition of bellow for any cut or damage.  Check the condition of bellow support. Assembly: 1. Insert the bellow on IBJ. NOTE:  Ensure that the bellow small end and big end are properly seated at their respective seating area. (Small end at bellow support and big end housing) 2. Assemble the small end metal strap. NOTE:  Use new metal strap for assembly.