HEXA

STEERING 29 A. Steering Reservoir : 1. Drain the power steering oil. (For procedure refer oil replacement procedure.) 2. Loosen and remove the mounting bolt and take out the sleeve/spacer, then remove mounting bolts of the bracket holding the reservoir with the BIW. 3. Remove the spring band clamp and disconnect the suction line and the return line from the reservoir end. 4. Take out the reservoir assembly. NOTE:  Plug holes of both reservoir and lines to avoid entrance of dirt and contamination. FITMENT: For fitment follow reverse procedure of removal. B. Power Steering Pump : REMOVAL: 1. Drain the power steering oil. (For procedure refer power steering oil replacement in this section.) 2. Remove power steering pump belt. (For procedure refer Alternator Belt removal in Engine section.) 3. Disconnect the hoses from the power steering pump. 4. Lock the power steering pump pulley, using a screw driver and loosen the pulley mounting bolts. 5. Remove pulley mounting bolts along with spring washer and remove the pulley 6. Loosen and remove mounting bolts along with the washer and remove the power steering pump. FITMENT: For fitment follow the reverse procedure of removal.