HEXA

REAR AXLE 39 4. Assemble the retainer clips to the ears of the plates. Make sure both clips are completely assembled or seated onto the ears of the plates. 5. With the differential case positioned as shown, assemble the clutch pack and side gear into the case. Make sure the clutch pack stays assembled to the side gear splines, and that the retainer clips are completely seated into the pockets of the case. To prevent pack from falling out of the case, it will be necessary to hold them in place by hand while repositioning case on bench. 6. Reposition case on bench as shown. Assemble the adapter plate into the side gear. Apply a small amount of grease into the centering hole of the step plate. 7. Assemble the other clutch pack and side gear as shown. Make sure the clutch pack stays assembled to the side gear splines, and that the retainer clips are completely seated into the pockets of the case. 8. Hold the clutch pack in position and insert the threaded adapter (Part No. 287058903508) into top side gear, insert forcing screw. Tighten forcing screw into bottom plate. This will hold both clutch packs in position. 9. With tools assembled into the case, position case onto the axle shaft by aligning the splines of the side gear with those of the shaft. 10.Loosen forcing screw slightly. Assemble both pinion mate gears as shown. Hold gears in position by hand.